Simply upgrading your Eurolite KLS Sets
You don’t need DMX to control a KLS an four additional spots – you only need a DMX line…
A DMX line, a spot with 3 DMX channels and the Eurolite FP-1 foot pedal, to be more precise. Sound strange, but it is not at all. A maximum of four spot have to be connected to the DMX out of the KLS and then lopped through (it works with KLS- 200, 401, 801, 1001). Everything is controlled with the foot pedal in a kind of Master/Slave mode.
Necessary requirement, the spot’s 3 channel DMX mode needs the following starting addresses:
Synchronic to panel 1 of the respective KLS: starting address 4
Synchronic to panel 2 of the respective KLS: starting address 7
Synchronic to panel 3 of the respective KLS: starting address 10
Synchronic to panel 4 of the respective KLS: starting address 13
Functionality of the foot switch remains unchanged: blackout, freeze, sound control, auto program.
Here are some of our spots which can be connected:
EUROLITE ACS Bars RGB,
EUROLITE PAR-64 RGB 24x5W,
EUROLITE PAR-64 RGB 36x1W Short sil
EUROLITE ML-56 TCL 18x3W
EUROLITE PAR-64 TCL 18x3W
To those who cannot call a KLS their own we recommend to take a look at our 8 KLS Kombo Packs. With the Kombo Pack 7 we also offer an alternative without DMX.